Thread: Mounting Tests.
View Single Post
Unread 04-01-2005, 10:21 PM   #35
freeloadingbum
Cooling Savant
 
Join Date: Nov 2002
Location: winnipeg
Posts: 129
Default

Quote:
Originally Posted by jaydee116
Sure seems like there is more than 8lbs...
You can make a simple setup to measure the spring load. Using a baseplate from one of your blocks attach 4 632 bolts, then throw on the springs and washers, then use another baseplate on top of the springs. Put something small in the centre of the top plate, taping it on so it doesn't slide around. That becomes the focal point for the weight. Next, put on the nuts so they just touch the top plate. If you have a dumbell and some weights, you can balance that across the focal point. If you're desperate, a 4 litre jug of water weights 8.8 lbs. With the weight on, count how many turns it takes to reach the top plate again. This will also tell you if the weight is properly balanced as they should all be the same.
freeloadingbum is offline   Reply With Quote