Pro/Forums - View Single Post

resago · 01-09-2002, 09:01 PM

this might sound stupid, but check and make sure you don't have one of the pelts flipped the wrong way. IE, canceling each other out. this would create the effect you are experiencing.

wire order should be red-black-red-black or black-red-black-red, NOT red-black-black-red or black-red-red-black

also the waterblock should be warm to the touch if both pelts are oriented correctly. my single 156watter keeps the waterblock rather warm to the touch.

also, pump->radiator->block->pump is generally considered best.

and finaly, make sure that whatever method you are using to insulate isn't preventing good contact on the cold plate to the core.

01-09-2002, 09:01 PM	#8
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	this might sound stupid, but check and make sure you don't have one of the pelts flipped the wrong way. IE, canceling each other out. this would create the effect you are experiencing. wire order should be red-black-red-black or black-red-black-red, NOT red-black-black-red or black-red-red-black also the waterblock should be warm to the touch if both pelts are oriented correctly. my single 156watter keeps the waterblock rather warm to the touch. also, pump->radiator->block->pump is generally considered best. and finaly, make sure that whatever method you are using to insulate isn't preventing good contact on the cold plate to the core. __________________ 2.4Ghz Compaq Workstation 2.8Ghz Custom 2700+ Custom still running 2000!!!! Help with Coding www.resago.com Last edited by resago; 01-09-2002 at 09:04 PM.