After the plumbing was done . . .
I found I was able to lift and shake the system a bit.
Then I lay it on its side.
Then I inverted it 180.
I tipped it 45 degrees for and aft in both direstions as well.
I am pretty damn sure there is no air hidden anywhere, lol.
Pretty happy with the above setup after a few weeks. The intake to the two pumps is 1/2" Tubing {0.75 OD with 1/8" wall thickness on the Tygon} comes through a "Y" six inches from the res outlet - feeding directly into the "mouth" of each pump as seen on one of the above images.
No sign of starvation as far as I can tell.
Cheers,
Joe
|