^ AVT has been making a block/pump combo for many years, this is where the 750 came from.
We have been manufacturing the MAG version at C-Systems since Dec/2004.
Our OEM customers and our parent company use the industrial version as part of a TEC system. They use liquid to increase the efficency of the TEC unit.
At AVT we use them for confined space heat sinks.
The main difference between industrial and home PC use models is flow.
All our current industrial style units run 1-2 liters per minute, where most of the blocks you all use slope out at 4-5 L/m. Not much difference in pump, just line size as space is always the issue when we use this system.
We are working on using several different current popular cooling block designs with the co-op of the manufactures. C-Systems has no interest in competing with current block manufactures, as they are our main customers.
Performance is 6 L/m at 2.3M head, this is after the micro channel block.
So you will have 5.4-5.9 l/m running through rad. The unit is smaller and less weight then the copper heat sink I took the picture off.
Not much too take picture of Max, it is a standard MAG pump with additional channels on the back, and a mating surface for block. The block is a simple micro channel design that Dan calculated from a engineering paper, looks like white water or any of the others. The main developement was behind the pump, with the combo in mind. Controlling EMF and harmonics being near CPU as the issue.
We hope to start offering retail versions of our heat exchangers as well soon, just awaiting go ahead for the new molds, as our current plastic tanks will not fit most of your appications.
*Not at C-Systems today, there installing additional equipement and electrical will not be stable. Nice to have a day off
