[pHaestus]

MH I have about 4 things going on at various stages of completion. The easiest for me to do is to try and generate some numbers for the modeling that Cathar and Les and Lolito_Fr were doing a while back. It's easiest because it uses all the old equipment and is separate from this new setup. The other easy thing to do is to begin collecting dP measurements on GPU and CPU blocks.

The other two things I'm doing are a little harder because they involve some rather drastic hardware mods. I have to pull the LM63 IC off this 9600XT and tap into the diode from that way and then calibrate it for GPU block testing. I also have to cut open my socket 939 socket and solder diode wires onto that 3000+. I've been sorta putting both those things off because I'm a big sissy.

Yes that's an AMS Gtower case. Bruce has shipped me a full tower with dual 120mm holes cut in the top for complete system testing. I'm waiting on it to get here to start messing with that project (instead of retesting a bunch of blocks for socket 939 I'm going to try and get a nice complete system testing setup running).