Pro/Forums - View Single Post

UnaClocker · 01-13-2002, 02:43 AM

It's going to hella slow down your flow, unless you can set it up so the water goes through all 21 lines at once (not as bad as it sounds, because the water is actually going through really slow, then recombining after passing through to resume normal speed, it's alot like BeCooling's 1/2" cube setup). But if you have the water looping back and forth through all those passages, you better have one helluva pump behind it.

01-13-2002, 02:43 AM	#2
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	It's going to hella slow down your flow, unless you can set it up so the water goes through all 21 lines at once (not as bad as it sounds, because the water is actually going through really slow, then recombining after passing through to resume normal speed, it's alot like BeCooling's 1/2" cube setup). But if you have the water looping back and forth through all those passages, you better have one helluva pump behind it. __________________ The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM!