i can make a custom cylindrical res for you
it can be as long a 2' (wouldn't go less than 3") and will be made of 1.75" ID acylic tube
i used a 3/4 fitting and a 1/2 fitting and a 3/4 fill port on top
i might have to buy a new tap to cut threads for 3/8 - i will have to check
$40 for the res
in the 2nd photo, you can see the devider between the in and out which speeds the bleeding process
i also have a polar flow NB block (anodized AL) you can have this if you buy the res
|