Quote:
Originally posted by mrcandy224
btw mashie, nice job with the water cooled GeForce3.. how many PCI slots does that take up? and do you have the block mounted to the copper with drilled holes? that way we wouldn't even need to bother with the stupid mounting holes and I could just epoxy down that giant thing with some schtuff.
(also that could be used for a peltier combination.. (I have a 120w I'm not using on the T-Bird).
|
It takes up 2 PCI slots, which only the GPU block does anyway so adding a heat spreader won't cause any extra problems. The heat spreader is epoxied to the RAM and GPU, the waterblock is bolted straight through both heat spreader and card.
Adding a peltier would be very easy if longer screws where used.
Quote:
Originally posted by futRtrubL
Nice idea mashie, did I also sea the GPU lapped there?
Edward
|
Yes the GPU was lapped together with the first layer of copper so they should be on the same level before adding the second layer.
I used 1 mm copper.