Pro/Forums - View Single Post

Angry_Steel · 05-29-2005, 02:37 PM

Ok, bought 2 Swiftech 655 pumps and they should be here in a couple of days.

Im going to have to order the Rads shortly so I have to come to a decision.

So here is the final setup minus the rads...Everything 1/2 with the San Ace 38's

CPU

655 w/ 6002-64

GPU
655 w/ Dden Maze4

I was thinking on the PA160s, Mounting them in the center of the tunnels in my radbox. Fan 1 pulling in fresh air, pushing it towards the rad, Fan 2 mounted on the rad, pulling air from the front, Fan 3 pulling air out of the tunnel. Equal distance between all three fans. Should be plenty of air for the rads with a certain amount of redundancy at the same time.

Yea, I know Im going overboard here but humor me. This is my build for a couple of years and Im just having fun with it.

05-29-2005, 02:37 PM	#8
Angry_Steel Cooling Neophyte Join Date: Apr 2005 Location: Torremolinos, Spain Posts: 76	Ok, bought 2 Swiftech 655 pumps and they should be here in a couple of days. Im going to have to order the Rads shortly so I have to come to a decision. So here is the final setup minus the rads...Everything 1/2 with the San Ace 38's CPU 655 w/ 6002-64 GPU 655 w/ Dden Maze4 I was thinking on the PA160s, Mounting them in the center of the tunnels in my radbox. Fan 1 pulling in fresh air, pushing it towards the rad, Fan 2 mounted on the rad, pulling air from the front, Fan 3 pulling air out of the tunnel. Equal distance between all three fans. Should be plenty of air for the rads with a certain amount of redundancy at the same time. Yea, I know Im going overboard here but humor me. This is my build for a couple of years and Im just having fun with it.