Pro/Forums - View Single Post

Hoot · 05-30-2005, 12:23 PM

FWIW, before removing the IHS, it took 1.55Vcore to run at 9x300 stable under Prime95 Torture. Now that it is gone and the AS5 has for the most part, settled in, I can run 9x300 at 1.42Vcore. That's measured at the socket, needless to say. I have managed to run either 9.5x310 or 10x300 at 1.65Vcore, again stable under P95 Torture. At that voltage and those speeds, the core temp rises and stabilizes at 42C.

I can't wait for my G5 to ship (ahem!) so I can see how much it gains me.

Hoot

05-30-2005, 12:23 PM	#13
Hoot Cooling Neophyte Join Date: Dec 2002 Location: Twin Cities Posts: 67	FWIW, before removing the IHS, it took 1.55Vcore to run at 9x300 stable under Prime95 Torture. Now that it is gone and the AS5 has for the most part, settled in, I can run 9x300 at 1.42Vcore. That's measured at the socket, needless to say. I have managed to run either 9.5x310 or 10x300 at 1.65Vcore, again stable under P95 Torture. At that voltage and those speeds, the core temp rises and stabilizes at 42C. I can't wait for my G5 to ship (ahem!) so I can see how much it gains me. Hoot __________________ DFI LP UT NF4 Ultra-D 7.04-3 Bios A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore 2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77V Connect 3D x850xt 620/625 2x WD 36GB Raptors in Raid0 DIY Jet Impingement WB on CPU / Pipecap WB on GPU Shrouded Camaro Heater Core / Swiftech MCP655 Pump Antec P-160 Tower / Seasonic S12 600W PSU MAXIM 6658 Thermal Diode Reader Moderator at OCForums