View Single Post
Unread 06-01-2005, 09:36 PM   #20
Hoot
Cooling Neophyte
 
Join Date: Dec 2002
Location: Twin Cities
Posts: 67
Default

Quote:
Originally Posted by |kbn|
Dunno if it would help, but when I removed the IHS from a few AMD k6-2 cpus it did REALLY help to freeze them first.
Freezing them shoudl make any glue/epoxy holding it on brittle, and make it easyer to come off.

I would be very interested to know if AMD 64's have bridges under the IHS - the k6-2's did, no idea as to their purpose though. If the AMd64's do it might mean there is a way to unlock higher multiplyers, which has not yet been tryed?
No, they just have pull-up resistor packs:



Hoot
__________________
DFI LP UT NF4 Ultra-D 7.04-3 Bios
A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore
2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77V
Connect 3D x850xt 620/625
2x WD 36GB Raptors in Raid0
DIY Jet Impingement WB on CPU / Pipecap WB on GPU
Shrouded Camaro Heater Core / Swiftech MCP655 Pump
Antec P-160 Tower / Seasonic S12 600W PSU
MAXIM 6658 Thermal Diode Reader
Moderator at OCForums
Hoot is offline   Reply With Quote