[WebMasta33]

Well, I bought 6 feet of it. I built a stand outa MDF to put my computer on, in that stand I will put my pump and my rad/fan. Not sure how I'm going to run the tubing outa there.... Kinda depends on how I attach everything.

Right now, I plan on having the radiator go parallel to the depth dimention (front to back) of my computer. The fan will blow in from the side, and will have enough opening to blow out the front/back. The pump will go in the back, under the stand. It will accept about a 4" hose from my radiator, and pump to my processor, from there, to the GPU (hopefully without too much trouble) and then from the GPU, back to the rad, which will probably require a hole in the bottom of my case. --Since I have a coolermaster case (which is fairly small) I will probably drill out the PC Speaker hole and will run my hose and power for the fans out that hole.

Silicon is just expensive because it's like over a buck a foot, plus shipping. The stuff I got was 68 cents a foot.