Quote:
Originally Posted by Long Haired Git
Please let me know how much tubing you have and of what ID, and what radiator you have, and any other components in the loop. I can then use the PQ graphs to predict flow rate, and then the CW graphs to give an approximation of the benefit.
Remember also that the 80/20 rule applies in spades to watercooling. You acheive so much with the least, and then the extras just snip of tiny improvements. Cathar rigged up a tiny AUD$10 pump that managed like 1.5 LPM (or less?) and it was only 4 degrees C worse than his full on pump. Pump was so weak it couldn't prime the system!!!
|
I have approx 6' (feet) of 1/2" tubing for the parallel
(approx 4.5' for series which is what I have now).
dtek whitewater w/ aluminum top.
fluidxp+.
T connection for fill.
pro-120 core
2 shrouds + 2 120/80cfms
Y connection
2 dtek MAGs
is this what you are asking for or do you need more?