Pro/Forums - View Single Post

Styyn · 07-24-2005, 01:46 PM

Just a follow-up on the filter I linked to above: it works extremely well, but with a 150 mesh filter you need some serious pressure to keep things going. This filter + the G5 has knocked my 30RZ down a couple of pegs. My system used to bleed in about 15 seconds (with an RBX #5 and no filter), and now takes a good hour + tipping/massaging to get clear of all the air.

Also be aware that the discs trap air nearly as well as particulates so the filter needs to be tapped, rotated, and inverted quite a bit until the entire system is 100% bled.

07-24-2005, 01:46 PM	#7
Styyn Cooling Neophyte Join Date: Sep 2004 Location: Minneapolis, MN Posts: 8	Just a follow-up on the filter I linked to above: it works extremely well, but with a 150 mesh filter you need some serious pressure to keep things going. This filter + the G5 has knocked my 30RZ down a couple of pegs. My system used to bleed in about 15 seconds (with an RBX #5 and no filter), and now takes a good hour + tipping/massaging to get clear of all the air. Also be aware that the discs trap air nearly as well as particulates so the filter needs to be tapped, rotated, and inverted quite a bit until the entire system is 100% bled.