Quote:
|
Originally Posted by blue68f100
Sid2000
I have the bios upgrade that will take you to 1.2.180 . This version does not enable LBA,, HD >137gig. But is required for the update to v 2. I have been looking for the update to v2. The upgrade process requires you to put your server in to updated mode 4 flashs with the reset, take about 30 sec to get active then you run the biosupdat.exe. It will ask for the IP address and off it goes, takes less than 5 minutes. I know that some hardware can not be updated, hardware restriction.
If need be I can upload it to snapserver that has most of the update avaliable.
I hope this helps.
blue68f100
|
Thanks but my snap is already running bios ver 1.2.180. Here is my snap's info:
Software: 3.4.803
Hardware: 1 1 0
Bios: 1.2.180
I can change the hardware from 1 1 0 to 2 0 0 but I'm having problems trying to upgrade to version 4. I've tried running the following upgrades:
ver 4.0.829
ver 4.0.830
ver 4.0.855
but all above versions gave me an error. If there's anyone who can help me with this I'll be very thankful. My snap is still running but I just wat to upgrade to a larger HD capacity (2X300GB).
Thanks alot...