[Roadster-2]

Help !!
Through the many helpful posts here I have tried upgrading the original 20Gb drive to an ATA133 120Mb and more recently an ATA100 40Gb. I have used both the early small version of Dolly (with a DOS strartup disk) and the later bootable CD-Rom version.

when I look at the Config Devices Info results I can see that it has not copied the Private partition. Consequently if the copy is made the boot drive it doesn't boot and just sits there with the lights flashing until I remove the power connector (after 24 hours the first time).

My software version is only 3.0.566 but I am reluctant to upgrade this on the original drive - it's on its last legs and I don't want to lose it. I was hoping to copy it and then upgrade the software.

Config results are -

Logical Device: 10000 Position: 1 JBOD Size (KB): 19496984 Free (KB): 19265840 Public Mounted
Label: Drive1 Single disk
Unique Id: 0x6E3E702C690BAB90 Mount: /0 Index: 1 Order: 1
Partition: 10000 Physical: 10007 FS Size (KB): 19767776 Starting Blk: 21124 Public
Physical: 10007 Drive Slot: 0 IDE Size (KB): 19937792 Fixed

Logical Device: 10006 Position: 0 JBOD Size (KB): 32296 Free (KB): 24536 Private Mounted
Label:Private Contains system files only
Unique Id: 0x6E3E702C690BAB90 Mount: /priv Index: 0 Order: 0
Partition: 10006 Physical: 10007 FS Size (KB): 32768 Starting Blk: 515 Private
Physical: 10007 Drive Slot: 0 IDE Size (KB): 19937792 Fixed

Logical Device: 10008 Position: 2 JBOD Size (KB): 19496984 Free (KB): 19265840 Public Mounted
Label: Drive2 Single disk
Unique Id: 0x6E3E702C690BAB90 Mount: /1 Index: 2 Order: 2
Partition: 10008 Physical: 1000F FS Size (KB): 19767776 Starting Blk: 21124 Public
Physical: 1000F Drive Slot: 1 IDE Size (KB): 19937792 Fixed

What am I doing wrong to not get the Private partition ?