Pro/Forums - View Single Post - WEI HI-END Pure Copper 1/2" Water-Block, test with STORM G4!!

BRiT · 07-29-2005, 10:23 PM

A few questions...

When you say G4 are you using Cathar's original G4 or did you obtain a Swiftech G4? As I understand it, the Swiftech G4 has some tweaks implemented to improve its performance over the original.

Was any mounting/testing/unmounting/remounting/retesting cycles performed for each block to eliminate possible bad mounts?

How was the Aerocool Gatewatch calibrated? Do the two different temp-probs measure the same temperature for the same medium (ie: potential skews between probe 1 and probe 2)?

What fans were used and what voltages were they run at?

From quick glances it looks like it would have a dramatic effect on flow rates... How restrictive is that radiator? How does it compare to the more common 2x120 or 3x120 rads?

Thanks...

07-29-2005, 10:23 PM	#4
BRiT Cooling Neophyte Join Date: May 2005 Location: Cleveland, OH Posts: 39	A few questions... When you say G4 are you using Cathar's original G4 or did you obtain a Swiftech G4? As I understand it, the Swiftech G4 has some tweaks implemented to improve its performance over the original. Was any mounting/testing/unmounting/remounting/retesting cycles performed for each block to eliminate possible bad mounts? How was the Aerocool Gatewatch calibrated? Do the two different temp-probs measure the same temperature for the same medium (ie: potential skews between probe 1 and probe 2)? What fans were used and what voltages were they run at? From quick glances it looks like it would have a dramatic effect on flow rates... How restrictive is that radiator? How does it compare to the more common 2x120 or 3x120 rads? Thanks... __________________ --\|BRiT\| / WTF?! "That which does not kill you, makes you wish it did."