Quote:
|
Originally Posted by blue68f100
Tried that, did not help.
Blue68F100
|
I have recoverd from my BIOS/Server not found/Lost.
I was playing around with the J1 & J6 jumpers on the motherboard. One of the jumpers caused the server to shut down NOW. The other I do not know if it had an affect on my recovery or not. Since I could not find the server, after several resets. I decided to format the hard drives, to remove any corruption I may had down.
The unit took 5-10 minutes before the harddisk started formating, I only installed 1 drive.
I was still having problem on startup, the system ether goes in to panic mode or starts disk check on the mirror drive.
A X Snap service tech said the extra ports (serila etc.) are turned off to speed up operations.
I did find someting of interest for you telenet users.
08/01/2005 13:43:44 Command: info nvram
NFS: ENABLED
HTTP: ENABLED
Telnet remote console: DISABLED (0)
RCP server: DISABLED (0)
BOOTP server: DISABLED
HTTPd Port: 80
SMTP Port: 25
SCSI Termination: INTERNAL, external devices illegal.
Protocol Daemons: 32
Raid Cache: 0
Raid Threads: 0
Current Code Page: 437 = US English
File System FSync: ENABLED
FileSystem Full Alert: 90%
It lookes like telenet may be an option.
I hope this info will help someone.
I am still trying to figure how I can reload the software in nvram.
Thanks for all of the info.
David
