Pro/Forums - View Single Post - 45C idle. 27C coolant. Good thermal interface. What gives?

Jerky · 08-02-2005, 10:16 AM

jman,

2 fan WC config: one blowing on rad. one blowing over socket / MOSFETs.
1 fan WC config: one blowing on rad.

The 2 fan configuration above is the only way to go at the moment. Those MOSFETs are way too hot.

Coolant and ambient temps measured using a digital thermometer. CPU temps measured with diode. I know the diode is not the way to measure accurately, but it's useful judging relative performance compared to my old aircooling setup.

08-02-2005, 10:16 AM	#9
Jerky Cooling Neophyte Join Date: Sep 2002 Location: Toronto Posts: 12	jman, 2 fan WC config: one blowing on rad. one blowing over socket / MOSFETs. 1 fan WC config: one blowing on rad. The 2 fan configuration above is the only way to go at the moment. Those MOSFETs are way too hot. Coolant and ambient temps measured using a digital thermometer. CPU temps measured with diode. I know the diode is not the way to measure accurately, but it's useful judging relative performance compared to my old aircooling setup.