finaly got it all together and up and running now, have a few problems to fix though, the power LED doesn't work, have a feeling the MB doesn't put out enough voltage for it, that or it's a bad LED, also the CPU's temp is high for being on the water cooling loop, was 30C idle on the boxed heatsink, and only 28C on the water cooling, the MB is also measuring the case temp kind of high at 39C, though the seperate temp sensor I have in the MB area says it's only 24C, wondering if it measure the MB temp at the heatsink for the voltage regulators and chipset which now doesn't have the CPU's fan cooling it. also couldn't get the connectors off the PSU to put the blue UV reactive ones I got on. well anyways, here's the pictures.
unfortunatly my camera doesn't do good at all with pics without the flash so this one to show the UV lighting didn't come out all that good.
here's my stealth modded DVD drive
and here's my front I/O panel
and last in the middle of the PSU wiring there is a drain valve for the water cooling loop.
