View Single Post
Unread 08-05-2005, 04:30 PM   #4
Long Haired Git
Cooling Savant
 
Long Haired Git's Avatar
 
Join Date: Jan 2003
Location: Sydney, Oz
Posts: 336
Default

Quote:
Personally im failing to see the point in chosing this over a good hsf
because....
Quote:
One interesting characteristic we found was that fan speeds make very little difference - in this instance, only a C/W of 0.01 between running the fans at 12 volts and 4.3 volts; at 4.3 volts, there is almost no noise from the fans
If I were Joe, I'd drop to just one shrouded fan @ 4v and see how that goes. Is the competing HSF going to compete on the noise level?

A GPU block would probably necessitate a complete 2nd kit.
__________________
Long Haired Git
"Securing an environment of Windows platforms from abuse - external or internal - is akin to trying to install sprinklers in a fireworks factory where smoking on the job is permitted." (Prof. Gene Spafford)
My Rig, in all its glory, can be seen best here
AMD XP1600 @ 1530 Mhz | Soyo Dragon + | 256 Mb PC2700 DDRAM | 2 x 40 Gb 7200rpm in Raid-0 | Maze 2, eheim 1250, dual heater cores! | Full specifications (PCDB)

Long Haired Git is offline   Reply With Quote