Quote:
|
Originally Posted by marcuri
note to self: get replys on procooling by having a thread title that implicitily implies that the forums suck ;p
|
So hopefully providing a new title will fix that.
Quote:
on a more serious note: procooling rocks, its definately alittle dead around here but there were plenty of people who helped me configure my wc setup for my new comp, just took aday or two longer to get replys than in other forums. theres plenty of great past info that can be found by searching and the stickies (esp the pump comparison) are also useful. by far you'll find the most experienced here and thus get the best advice instead of people talking out of there ass like on other forums.... a problem which isn't limited to water cooling although water cooling, since its not mainstream, does have a bit more disinformation than other 'topics'.
if i were you, stick to these forums, and don't stray too far.
|
I agree, hence my frustration but I digress ...
Quote:
|
as for external mounting, i'm about to try it for my first time.. and i'm doing it with a lian li v2000a (huge case if you didn't know). its good if you don't want to cut anything for those larger rads like a 2 or 3 x 120mm to fit in or at the very least not cut the case much.. (to get the 1/2"in 3/8od tubing inside i'm probably going to have to cut the case alittle bit) and it will drop the temps a bit as well from what i've heard. the swiftech rad box is $24 and its a good option imo... i'll let you know how easy it is to use when i finally get these wc parts that have been sitting next to my new rig for 2 weeks installed.
|
With such a big box I'd be more than a little temped to go internal.
Thanks!
L