I recently upgrade our Snap Server 4100 to o/s v3.4.803, and have been having problem with the drives ever since. Whenever I boot it up, the first 2 drives come up ok. The 3rd and 4th drives lights come up as yellow. On the web browser configuration screen, on the first 2 drives appear.
I have rebooted it, and reset the the Snap Server (using the reset button 4x), and it comes with the same problem - 2 drives OK and 2 bad. I swapped the IDE cables around a bit, and have found that the first 2 drives always come up ok. Here's the results:
-----------------
IDE 1 - empty
IDE 2 - empty
IDE 3 - 40GB Drive
IDE 4 - 40GB Drive
I see 2 drives...
-----------------
IDE 1 - empty
IDE 2 - 40GB Drive
IDE 3 - 40GB Drive
IDE 4 - 40GB Drive
I see 2 good drives, IDE2 and IDE3. IDE4 status light is yellow.
-----------------
IDE 1 - 40GB Drive
IDE 2 - 40GB Drive
IDE 3 - 40GB Drive
IDE 4 - 40GB Drive
I see 2 good drives, IDE1 and IDE2. IUDE3 and IDE4 status lights is yellow.
Has this happened to anyone else? Does anyone know what I can do to fix the problem?
|