Pro/Forums - View Single Post

GuyBFF · 08-02-2001, 02:59 AM

The eheim 1250 is about the same level as the Danner Mag-Drive 350. The 1048 is between a 500 and a 750. Eheim rates there pumps in metric gallons (4.5 litres, rather than 3.78 litres), so there actually pushing a little more.

I'd normally say the 350 was enough, but I'd spec higher on either end due to the way you want to split flow to the three waterblocks.

Ideally I would say a Danner 500 or a Eheim 1048 would be more than enough with extra waterblocks (as any more will just contribute heat).

08-02-2001, 02:59 AM	#7
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	The eheim 1250 is about the same level as the Danner Mag-Drive 350. The 1048 is between a 500 and a 750. Eheim rates there pumps in metric gallons (4.5 litres, rather than 3.78 litres), so there actually pushing a little more. I'd normally say the 350 was enough, but I'd spec higher on either end due to the way you want to split flow to the three waterblocks. Ideally I would say a Danner 500 or a Eheim 1048 would be more than enough with extra waterblocks (as any more will just contribute heat). __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...