Pro/Forums - View Single Post

Mattallyc · 08-22-2005, 08:54 AM

After 1.5 days I've finally come to the end of this thread(!) but have not found a solution to my problem. The closest mention is Neils post (#649).

I've two snap servers. A 1000 and an 1100. The HDD in the 1100 died so I bought a new one and cloned the good drive in the 1000 to it (thanks to this thread for the info on this). The new drive works fine in the 1000 server (gone up to 80GB from 30GB).

The problem is still with the 1100. Either drive fails to work in it. When I apply power to the 1100 it comes on straight away. Waiting a bit longer (10 - 20 secs) it settles down and I get the following led pattern:

System: on 2 secs / off 0.5 sec
Link: always on
Net: intermittant rapid flashing
Disk: copies system led except double flash in on period

Assist can't find the drive and I've IP scanned the network to try and find it to no avail so its not getting an IP address. It won't perform a reset either. I don't know the details for the 1100 as I can't access it. The details for the 1000 are:

Software version: 3.4.803(US)
Hardware version: 3.12
Bios: 2.1.366

Anyone got any suggestions??

Thanks in advance,

Matt.

08-22-2005, 08:54 AM	#699
Mattallyc Cooling Neophyte Join Date: Aug 2005 Location: Cornwall - UK Posts: 3	After 1.5 days I've finally come to the end of this thread(!) but have not found a solution to my problem. The closest mention is Neils post (#649). I've two snap servers. A 1000 and an 1100. The HDD in the 1100 died so I bought a new one and cloned the good drive in the 1000 to it (thanks to this thread for the info on this). The new drive works fine in the 1000 server (gone up to 80GB from 30GB). The problem is still with the 1100. Either drive fails to work in it. When I apply power to the 1100 it comes on straight away. Waiting a bit longer (10 - 20 secs) it settles down and I get the following led pattern: System: on 2 secs / off 0.5 sec Link: always on Net: intermittant rapid flashing Disk: copies system led except double flash in on period Assist can't find the drive and I've IP scanned the network to try and find it to no avail so its not getting an IP address. It won't perform a reset either. I don't know the details for the 1100 as I can't access it. The details for the 1000 are: Software version: 3.4.803(US) Hardware version: 3.12 Bios: 2.1.366 Anyone got any suggestions?? Thanks in advance, Matt.