I think trying to fuse the pins to the base with a torch or something like that would warp the base. Soldering the pins in with some Silver solder wouldn't be bad though. Also putting some AS5 or AS5 Epoxy on the pins before putting them in would probably help with transferring heat if melting/soldering the pins in isn't possible. I imagine with the tight fit that the pins (probably) have the AS5 wouldn't be washed away.
__________________
Athlon 64 3200+ Rev F @ 2.4Ghz (and climbing) @ 1.53v, DFI Infinity UltraII-M2, 512MB Apple Micron D9 DDR2 @ 400MHz (DDR2 800) 5-5-5-12 @ 2v, 128MB Radeon X800 @ 460/900, Dual 120GB HDs in RAID 0
Loop 1: D5 Pump • Bonneville w/ AC Heater Core • Swiftech MCW6002 • Gemini Tsunami VGA block • Gemini Tsunami S478 block (cold side chiller block)
110W 16v TEC @ 60W 12v
Loop 2: PC Watercooling Shop 12v Water Pump • PCWCS 80.2 Rad • Gemini Tsunami (hot side chiller block)
|