View Single Post
Unread 08-28-2005, 04:12 PM   #14
Ls7corvete
Cooling Savant
 
Join Date: Oct 2004
Location: FL
Posts: 164
Default

Quote:
Originally Posted by Belenar
How about using a temperature based fan speed controller (or alike system) and change that to increase/decrease the voltage on your TEC's based on the water temp?
I don't know how possible that is or how hard, but I would definitely consider that if I were aiming for a test bench setup...
Seems simple eh?

google variable peltier controller. I wouldnt mind one of their setups If it worked at 5v. May work out for your testing though. I think running three 26v TECs in series off of a 24v PSU through one of those controllers would be an excellent option.
http://mcshaneinc.com/html/5C7-350.htm

Quote:
I was thinking about using a 12VDC pump such as the MCP350 or the C System Mag and using a fan controller to very the speed of the pump..
Thats what I would do.l

Last edited by Ls7corvete; 08-28-2005 at 04:19 PM.
Ls7corvete is offline   Reply With Quote