Quote:
|
Originally Posted by pb1
I just received an old M4100 which works fine, but was own by another company. I bought it in Germany and I'm french, so i would like to reset all 
1° To get a new IP adress for my LAN 
2° To get a new pass (i do not know the old one as far as it was an auction for a dead firm)
3° To change the OS
I tried to reset it by pressing the reset button+power on
The leds blinked
The "system" one was blinking + disk 1 and then==>Power Off automaticly 
So i really do not know how to manage that.
Do you have an idea to help me please ? WOuld be great!!! 
Server N° 562275
V° 3.4.772
hardware 2.2.1
Bios 2.4.437
I'm french, so you can answer me in french or in english. |
The reset should be like all of the Snap servers (1000,1100,2000,2200).
Press and hold the reset button while powering up the unit.
Press the reset button 4 times.
The disk light should blink 4 times.
if not push the reset button to correct.
If correct 4 blinks
Press and hold the reset button till the system light and disk light goes out.
release the reset button
The unit should reset all network settings and the Admin Password.
Wait at least 2 minutes.
Then use Assist to do the initial setup.
Good luck
David