[coolmiester]

Eventually started marking out for a custom flame grill for this case.

Its going to be hand cut from 3mm aluminium plate which will obviously be polished once its all cut out so should look quite good providing all goes well.

I first marked out the edge using the BIX shroud for a guide and then added some flames using one of mnpctechs flame stencils for reference.

It'll do nothing for air flow but that was never the priority.......look good function second

It will take quite a while so don't expect it finished tonight





Managed to get all the cutting done using a fret saw with the tiniest little 18tpi blades which was good fun so its just a case of filing the corners round and polishing the whole thing to match the shiny case.









You guess correctly

Got the grill polished using Peek and my trusty DA Polisher and then fitted so loads of pictures

All im waiting for now is the release of the NV-78 blocks to plumb in the GFX cards