Note the black square in the middle represents the die and the entire dark blue area is the IHS...... Once again it is not a good idea to have a die sim so big.
Quote:
|
Originally Posted by Groth
This is a little later than planned, but...
Given 32 mm square copper heatspreader 1 mm thick, heat it with a 10 mm square 100 watt uniform heat source, cool the opposite side with a heatsink with an h(eff) of 20,000 W/m^2, what's the heat flux density at the heatspreader/heatsink interface?
 |
The whole thread:
http://forums.procooling.com/vbb/sho...3&page=1&pp=25