Quote:
|
Originally Posted by Long Haired Git
Not for me then or now? Perhaps join OCAU and then check it out?
Anyhow, its a mini-minor radiator, so should be plenty in the wreckers in the UK!
|
I am a member there or I wouldn't even be able to read the thread. I guess the image host must be blocked by the corporate proxy here.
Quote:
|
Originally Posted by Long Haired Git
All I am saying is to make use of the fans you use. The graph near "zero" air flow is very steep. Best avoided.
Turn it down. How slow can you get the fans before the CPU hits 50 or 60 degrees? How much heat is the pump adding (like, do you have an overpowerful pump)?
|
It is
this mod that I use an 80.1 in. BF2 will become unstable after a while if I run the fan at 9V, at full blast it can keep on going for days.
Quote:
|
Originally Posted by Long Haired Git
How much hacking can you stomache? I'd find a radiator sized externally the same or slightly smaller than the case's lid, and hack the entire lid off. Then I'd make all fans intake fans, and thus all air comes into the case and then exits over the big radiator.
2nd idea is to get a normal 120.2 sized rad and lie it down at the back out about 2 inches from the back of the PC. Yes, vertical is not as good, but meh.
|
The idea is to not have any protruding bits from the case itself. I might just mod a subwoofer to hold a PA160, pump, rad and some very silent fan pulling air through it.