Quote:
|
Originally Posted by shfawaz
I just upgraded my Snapserver 4100 to Snap OS 4.0805 using the upgrade file and apparently the upgrade took without a hitch. However my disks are no longer accessable. Looking at Disk status it says "Uninitialized. Disk has not been validated yet. Please wait."
It has been like that for over two hours. This is a Raid 5 setup with four discs. I had recently replaced Disk one I with a 120Gb drive prior to this upgrade and set it up as a spare and the Raid used it and joined it with the other three, and it has been working fine with the three other 80Gb drives without any problems.
Am I missing something here? Is there something I should do to get the Snap to initialize? When the unit boots up, it checks all four drives and no drive lights stay on, nor does the disk light stay lit after it has rebooted.
In the log, it shows: File System : Set-up of logical disk failed. Device ID: 60000 (hex)
|
Figured it out. The upgrade didn't like the oddball hard drive size compared to the stock 80Gb units, so I unplugged it entirely and voila! the Snap server is up and running like a charm. I replugged in the 120Gb unit, reformatted it, and now it is in the process of repatriating it into the raid. Best part is no data loss. Cool!