Quote:
Originally Posted by Risky
I might suggest that you thread the part at 3/8 instead of 1/4 for the bigger pump (assuming this is physically possible. It may or may not make a material difference, but some people will be attacted by any tiny reduction in restriction.
|
I just finished comparing ID of various barbs designed for 1/2" ID tubing. Of the brass and poly models tested whether 1/4 NPT or 3/8 NPT, the internal flow path at the most restrictive point(through the barb), were all .37". The poly barbs that come with the HWLabs Black Ice Extreme radiators were a little bit better at .385". Of all I tested, the DD 9/16-18 NPT high flow barb has the largest opening at .40"!
__________________
ASUS Maximus II Formula, E8600@4050,
OCZ 2x2GB PC2 8500@5-5-5-18, Vista 64,
GTX 280@693/1508/2566, Audigy 2,
PC P&C 750, ASUS DVD R/RW,
Velociraptor 300, Raptor 74,
Storm rev2, modified Laing DDC,
modified HL BI2 Extreme, 7/16 ID Tygon,
modified DD res, PC ICE, TT liquid temp monitor
|