Pro/Forums - View Single Post - Flow and pressure in serial/parallel loops

Maviryk · 09-16-2005, 02:43 PM

The GPU block is here http://www.xoxide.com/thermaltake-bi...ter-block.html

I made a different mounting bracket for it. First and last time I'm buying a cheap block.

Right now I'm running in parallel with the L30, load temps with 100% CPU and GPU (running World of Warcraft GPU/100% CPU/50% and Folding@Home CPU/50%) temps are CPU 44C, GPU 42C, Water 25C, intake air~20C

Idle Temps are CPU 29C, GPU 35C, Water 23C. +/- 1C on temps, using external probes for CPU, Air, and Water, Onboard for GPU.

Thanks for your help guys, just what I was looking forward to when joining the Procooling forums.

Here's a pic of my current temporary setup

09-16-2005, 02:43 PM	#5
Maviryk Cooling Neophyte Join Date: Sep 2005 Location: Michigan Posts: 9	The GPU block is here http://www.xoxide.com/thermaltake-bi...ter-block.html I made a different mounting bracket for it. First and last time I'm buying a cheap block. Right now I'm running in parallel with the L30, load temps with 100% CPU and GPU (running World of Warcraft GPU/100% CPU/50% and Folding@Home CPU/50%) temps are CPU 44C, GPU 42C, Water 25C, intake air~20C Idle Temps are CPU 29C, GPU 35C, Water 23C. +/- 1C on temps, using external probes for CPU, Air, and Water, Onboard for GPU. Thanks for your help guys, just what I was looking forward to when joining the Procooling forums. Here's a pic of my current temporary setup Last edited by Maviryk; 09-16-2005 at 02:52 PM.