Pro/Forums - View Single Post - Excellent Pump Review @ Cooling-Masters

ricecrispi · 09-28-2005, 01:59 AM

AquaXtreme 50Z-DC12
basic info you can get off cooltechnica.com

The AQX50Z is a centrifugal pump using magnetic ___. This is the revision 2 of the former MCP600 that had known axis problems. This is an industrial pump from manufacturer panWorld, headed by of an engineer of Iwaki. Note the resemblance striking between their models

The body is completely in aluminum and the pump head in plastic. This is a pump exclusively to external usageand non-submergeable! THe outlets aref 12.7 mm (1/2") of external diameter and 10 mm internal so tubing 10 or 12 mm will fit tightly like John Holmes in the backdoor. .....Some pump description on how the 50Z works internally.

When on it's back, one can see the 2 mounting holes and bases that allows for guides of the principal axis allowing the rotation of torque in the front. Removal of the front cap gives access to the electronics hats, the stator, 3(magnetic sensors) situated on the white block at the back. ...pump jargon and how the pump works....

09-28-2005, 01:59 AM	#17
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	AquaXtreme 50Z-DC12 AquaXtreme 50Z-DC12 basic info you can get off cooltechnica.com The AQX50Z is a centrifugal pump using magnetic ___. This is the revision 2 of the former MCP600 that had known axis problems. This is an industrial pump from manufacturer panWorld, headed by of an engineer of Iwaki. Note the resemblance striking between their models The body is completely in aluminum and the pump head in plastic. This is a pump exclusively to external usageand non-submergeable! THe outlets aref 12.7 mm (1/2") of external diameter and 10 mm internal so tubing 10 or 12 mm will fit tightly like John Holmes in the backdoor. .....Some pump description on how the 50Z works internally. When on it's back, one can see the 2 mounting holes and bases that allows for guides of the principal axis allowing the rotation of torque in the front. Removal of the front cap gives access to the electronics hats, the stator, 3(magnetic sensors) situated on the white block at the back. ...pump jargon and how the pump works....