Pro/Forums - View Single Post

boyelectric · 09-28-2005, 03:12 PM

I have a 4000, Hardware 2.01, Bios 2.0.282, Software updated to 4.0.855, then .860.

The old drives are fine, raid is fine. Done the debug/ide command and the new drives (Hitachi 250GB) all come out at 137GB. They work fine like this, and I can make a raid fine, but just not the LBA support.

Does anyone have tricks for those of us who are left out in the cold?

I also tried adding the drives in one at a time or all at once, and still not seeing the full capacity.

I also have done the reinit, several times, I've even tried a cold restart to try to jog its little brain... no avail.

(4) Hitachi DeskStar 7K250 - 250 GB - ATA-100, 7200 rpm, 8MB buffer

09-28-2005, 03:12 PM	#714
boyelectric Cooling Neophyte Join Date: Sep 2005 Location: Utopia Planitia Posts: 3	Same issue, no LBA support I have a 4000, Hardware 2.01, Bios 2.0.282, Software updated to 4.0.855, then .860. The old drives are fine, raid is fine. Done the debug/ide command and the new drives (Hitachi 250GB) all come out at 137GB. They work fine like this, and I can make a raid fine, but just not the LBA support. Does anyone have tricks for those of us who are left out in the cold? I also tried adding the drives in one at a time or all at once, and still not seeing the full capacity. I also have done the reinit, several times, I've even tried a cold restart to try to jog its little brain... no avail. (4) Hitachi DeskStar 7K250 - 250 GB - ATA-100, 7200 rpm, 8MB buffer Last edited by boyelectric; 09-28-2005 at 03:22 PM. Reason: add info