Quote:
|
Originally Posted by boyelectric
I have a 4000, Hardware 2.01, Bios 2.0.282, Software updated to 4.0.855, then .860.
The old drives are fine, raid is fine. Done the debug/ide command and the new drives (Hitachi 250GB) all come out at 137GB. They work fine like this, and I can make a raid fine, but just not the LBA support.
Does anyone have tricks for those of us who are left out in the cold?
I also tried adding the drives in one at a time or all at once, and still not seeing the full capacity.
I also have done the reinit, several times, I've even tried a cold restart to try to jog its little brain... no avail.
(4) Hitachi DeskStar 7K250 - 250 GB - ATA-100, 7200 rpm, 8MB buffer
|
I remember reading on the forum that the LBA is locked out on the 4000. Snap did not want the 4000 out preform there newer 4100.
There is a "ide 48bitLBACounter" flag that is turned off. But I do not know the command to turn it on. Use the debug to set.
Poogles_uk may be better qualified to answer this question.
David