Pro/Forums - View Single Post - BillA: Pressure testing the Swiftech MCW6000?

Ninjan · 10-03-2005, 07:05 AM

I cut away the inlet on a 6000 block to repalce them with 1/2". So i had to expand the inlet with a mill to give room for the new diameter. So now i want to know the best method to solder/attach the new barbs to the top of the block.
Sorry, but i don´t follow the soldering part...
Is it first solderd with a non lead solder an then afterwards solderd with slilver (at high temperature)?
Yes, my native laguage is not english, so i can have a hard time understand somtimes.

10-03-2005, 07:05 AM	#16
Ninjan Cooling Neophyte Join Date: Nov 2003 Location: Sweden Posts: 5	I cut away the inlet on a 6000 block to repalce them with 1/2". So i had to expand the inlet with a mill to give room for the new diameter. So now i want to know the best method to solder/attach the new barbs to the top of the block. Sorry, but i don´t follow the soldering part... Is it first solderd with a non lead solder an then afterwards solderd with slilver (at high temperature)? Yes, my native laguage is not english, so i can have a hard time understand somtimes.