Pro/Forums - View Single Post - AquaXtreme™ MP-1 Universal GPU Water Block

Blackeagle · 10-05-2005, 10:27 AM

Bruce I'd also like to know how tall RAM sinks used with your block can be if 1/16" walled tube is used.

I suspect the underside of the lid shows a raised area between the inlet/outlet to force the water to flow through the pins/channels, can you confirm this, or better, post a pic of the inside of the blocks top?

From first look I like it. Larger ID barbs than most to help with pressure drop & good structure to improve cooling.

Nice work, thanks.

10-05-2005, 10:27 AM	#14
Blackeagle Thermophile Join Date: Oct 2002 Location: U.S.A = Michigan Posts: 1,243	Bruce I'd also like to know how tall RAM sinks used with your block can be if 1/16" walled tube is used. I suspect the underside of the lid shows a raised area between the inlet/outlet to force the water to flow through the pins/channels, can you confirm this, or better, post a pic of the inside of the blocks top? From first look I like it. Larger ID barbs than most to help with pressure drop & good structure to improve cooling. Nice work, thanks. Last edited by Blackeagle; 10-05-2005 at 11:17 AM.