PLAN ONE
I will have two pelts on both sides of a 50mm wide rad. Two pelts from 12 volts to 15 gives me a lot of flexibilty and efficiency. 180 watts to 280 watts. I like this one the most.
169 watt / 16.4 VMax / 16.1 IMax
5 volts: 15.7 watts; 4.90 amps
6 volts: 22.6 watts; 5.89 amps
7 volts: 30.8 watts; 6.87 amps
8 volts: 40.2 watts; 7.85 amps
9 volts: 50.9 watts; 8.83 amps
10 volts: 62.8 watts; 9.81 amps
11 volts: 76.0 watts; 10.79 amps
12 volts: 90.5 watts; 11.78 amps
13 volts: 106.2 watts; 12.76 amps
14 volts: 123.2 watts; 13.74 amps
15 volts: 141.4 watts; 14.72 amps
16 volts: 160.9 watts; 15.70 amps
PLAN TWO
I might be able to use this pelt at 13.5 volts 178 Watts but I'm am worried about pushing the PS to the edge. I'm trashing the idea in general because i don't think the waterblock can dissipate the amounf of heat of 140 to 170 watts. Can some confirm this
I can use two pelts and get extreme and push the setup to the limits. 340 watts to 280 watts total.
226 watt / 15.2 VMax / 24 IMax
5 volts: 24.5 watts; 7.89 amps
6 volts: 35.2 watts; 9.47 amps
7 volts: 47.9 watts; 11.05 amps
8 volts: 62.6 watts; 12.63 amps
9 volts: 79.2 watts; 14.21 amps
10 volts: 97.8 watts; 15.78 amps
11 volts: 118.4 watts; 17.36 amps
12 volts: 140.9 watts; 18.94 amps
13 volts: 165.3 watts; 20.52 amps
14 volts: 191.7 watts; 22.10 amps
15 volts: 220.1 watts; 23.68 amps
Last edited by ricecrispi; 10-17-2005 at 03:59 PM.
|