Pro/Forums - View Single Post

ricecrispi · 10-17-2005, 03:30 PM

amd 64 rev E @ 2.5 ghz ----90 watts max
6600gt--------------------------60 watts not sure Max W but seems correct. I always cool backside aswell.
DFI nf-4 chip-------------------25 watts I have no clue how much?
L35 pump----------------------19 watts.
------------------------------------
200 watts heat from the loop. I would say at all things on range is 170-215 watts.
Cathar was talk about power draw doesn't= heat dissipated due to ineffieciency of the PSU. I say the number is lower but I will find out.

169 Watt pelt at 13.5 V gives 114.7Wx2 pelts= 230 watts of pull.
can always up the voltage up to 15 V if it's not enough power.

13.5 V x 13.25 I = 178.8 x2 = 357.75 watts
357.75 watts + 200 watts from loop + 20watts pumps x2 = 597.75 watts total

Right now I have a bonny 120x2 heatercore and chevelle heater core. Need more Info on HC Dissipation and flow rate charts. I think I can handle the heat load unless my thought process is wrong.

Thats 270 watts for each waterblock. Even though the rads can handle this how much temp differential will I get? (1 TH/Tc) x temp delta. I get the math but whats my temp delta. Can't be -60C or -70C theorectical.

I will add more info and do more research in the future but I'm very noob at this.
look over this and look for some mistakes on my part.

I'll be back in a few hours to add more info

10-17-2005, 03:30 PM	#8
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	amd 64 rev E @ 2.5 ghz ----90 watts max 6600gt--------------------------60 watts not sure Max W but seems correct. I always cool backside aswell. DFI nf-4 chip-------------------25 watts I have no clue how much? L35 pump----------------------19 watts. ------------------------------------ 200 watts heat from the loop. I would say at all things on range is 170-215 watts. Cathar was talk about power draw doesn't= heat dissipated due to ineffieciency of the PSU. I say the number is lower but I will find out. 169 Watt pelt at 13.5 V gives 114.7Wx2 pelts= 230 watts of pull. can always up the voltage up to 15 V if it's not enough power. 13.5 V x 13.25 I = 178.8 x2 = 357.75 watts 357.75 watts + 200 watts from loop + 20watts pumps x2 = 597.75 watts total Right now I have a bonny 120x2 heatercore and chevelle heater core. Need more Info on HC Dissipation and flow rate charts. I think I can handle the heat load unless my thought process is wrong. Thats 270 watts for each waterblock. Even though the rads can handle this how much temp differential will I get? (1 TH/Tc) x temp delta. I get the math but whats my temp delta. Can't be -60C or -70C theorectical. I will add more info and do more research in the future but I'm very noob at this. look over this and look for some mistakes on my part. I'll be back in a few hours to add more info Last edited by ricecrispi; 10-17-2005 at 04:41 PM.