Pro/Forums - View Single Post

soundidea · 11-02-2005, 12:53 PM

David,

Thanks for the help. I was able to reset the 1000 and assist v.4 was able to configure it. I have access to it now.

Snap 1000 specs:

Server # 108360
Software Version: 2.2.393
Hardware Version: 3.1.1
Bios Version: 2.1.363

I have a Seagate ATA100 200GB 7200 8MB cache drive on the way. 3.5" 5400 drives are not common and not as good a value when you can find them. The new 7200 drives are quieter and run cooler as the technology improves....hopefully it will not run hot! I will keep an eye on it and look at the fan/cooling state as I progress.

I have the upgrade info you sent and will tackle that after I get the drive installed and am limited to 32MB. Any tips are appreciated. It is nice to see it on the network again.

I will look for a used, more advanced Snap for my network as well. Any model suggestions?

Thanks again,

Nelson

11-02-2005, 12:53 PM	#772
soundidea Cooling Neophyte Join Date: Oct 2005 Location: Oakland Posts: 23	Nelson Snap1000 lives! David, Thanks for the help. I was able to reset the 1000 and assist v.4 was able to configure it. I have access to it now. Snap 1000 specs: Server # 108360 Software Version: 2.2.393 Hardware Version: 3.1.1 Bios Version: 2.1.363 I have a Seagate ATA100 200GB 7200 8MB cache drive on the way. 3.5" 5400 drives are not common and not as good a value when you can find them. The new 7200 drives are quieter and run cooler as the technology improves....hopefully it will not run hot! I will keep an eye on it and look at the fan/cooling state as I progress. I have the upgrade info you sent and will tackle that after I get the drive installed and am limited to 32MB. Any tips are appreciated. It is nice to see it on the network again. I will look for a used, more advanced Snap for my network as well. Any model suggestions? Thanks again, Nelson