Pro/Forums - View Single Post

ricecrispi · 11-07-2005, 12:33 AM

Applications being targeted.
Laser and Plasma Nozzles-Gun Barrels
Self Cooling Brake Pads-Friction Plates
Heat Exchangers-Thermo Electric Coolers

I don't think 10 watts is going to be a limit. It was used as a testing example. It can handle 250 C degree heat loads and has higher thermal conductivity than AL and diamond.

Re-direction of heat transfer idea of bending the tubes sounds very interesting.
I'm picturing Thermo-Carbon tubing/heatpips. No water!!! Designing the entire case as a heatsink...

I bet i'll see this happen when I'm almost dead and don't care any longer.

The idea is it change heat transfer the way fiber optics did with communications.

11-07-2005, 12:33 AM	#8
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	Applications being targeted. Laser and Plasma Nozzles-Gun Barrels Self Cooling Brake Pads-Friction Plates Heat Exchangers-Thermo Electric Coolers I don't think 10 watts is going to be a limit. It was used as a testing example. It can handle 250 C degree heat loads and has higher thermal conductivity than AL and diamond. Re-direction of heat transfer idea of bending the tubes sounds very interesting. I'm picturing Thermo-Carbon tubing/heatpips. No water!!! Designing the entire case as a heatsink... I bet i'll see this happen when I'm almost dead and don't care any longer. The idea is it change heat transfer the way fiber optics did with communications.