Sorry, definitively I have not explained well.
Thank you for you response Long Haired Git, I know the functioning and this information, but I was referring to concrete information of measurements.
Thank you for you also Incoherent, for the graph.
Better, I will put the concrete information.
I have a XP Thoroughbred, some programs indicate me, that this processor must have a consumption in power about 68W, but I have measured a low power in W across the waterblock, lower was expecting for me. Concretly I have measured between the entry and exit of the block an average of 0.11ºC for a flow of 313.4l/h (82.79 gal/h), aprox 40W. The heats losses I think that they are too high in relation to the calculation of the program and I thought, between other things, that I was measuring badly.
Recently I have finished a bank of test whit a...heat die? and I have repeated the test by means of a resistance with a consumption of 41W measuring in water a difference across the block, an average of 0.12ºC and average also flow of 309.6l/h (81.78gal/h), 43.1W.
The reason of commenting all that, it is because I wanted to confirm my information in similar cases comparing power generated by the processor.
|