Pro/Forums - View Single Post

billbartuska · 11-14-2005, 07:15 AM

[quote=abrasiveoneBasically what is happening is my tubing going into the pump is flattening and limiting my water flow because of too much suction from the pump. The whole tube flattens a little but right at the pump intake it almost crimps closed. I have a feeling that if I replace that piece of tubing that the piece before will do the same thing.

Any help would be appreciated. Thanks.[/QUOTE]Coolsleves
http://www.swiftnets.com/products/coolsleeves.asp

11-14-2005, 07:15 AM	#3
billbartuska Cooling Savant Join Date: Jun 2005 Location: Skokie, Illinois Posts: 322	[quote=abrasiveoneBasically what is happening is my tubing going into the pump is flattening and limiting my water flow because of too much suction from the pump. The whole tube flattens a little but right at the pump intake it almost crimps closed. I have a feeling that if I replace that piece of tubing that the piece before will do the same thing. Any help would be appreciated. Thanks.[/QUOTE]Coolsleves http://www.swiftnets.com/products/coolsleeves.asp __________________ My new rig.... Intel SE440BX-3, PIII 550 (@ 680) MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180) Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors