Quote:
|
Originally Posted by blue68f100
That is strange.
You should have a hardware version.
You need your model set to "2 4 drive IDE Laser"
I do not know if the raid needs to be turned off, and set to JOBD.
You may need to unlock the bios for it work. (bios unlock).
If you unlock the bios make sure you lock it back after the change (bios lock).
David
|
Thanks for the tips, but unfortunately, this still does not keep the setting at Laser.
I navigate to the console page:
bios unlock
bios model 2
bios lock
and then check the model again, and it reports as being back to minnie.
I'm not sure what difference disabling RAID would make, and since I have the 3.4 OS, I cannot use JBOD.
//Edit:
The serial number that the device is listing is also incorrect, however when I set the proper serial number (which also changes the hardware address) the machine reverts back to the incorrect serial, just like it does for the model #.