Pro/Forums - View Single Post

BillA · 11-23-2005, 09:39 AM

don't really know pH
from an individual perspective all I need is a source, I can figure out what the #s mean
from a community perspective a common platform is needed

TTVs, good or bad, are out due to nonavailability

a heat die is needed, how much similitude is to be sought ?
AND HOW WILL THE FACE BE MAINTAINED ?
this topic cannot progress (with me) w/o addressing this issue
I had offered to lap dies while with Swiftech, this is now out - what next ?
I can hand lap because I have a Flatscope (optical flat reflex viewer), do it 'till its right
what does everyone else do ?

let us NOT hear foolishness about 'good enough', this is the heart of the whole system
not flat = variable and certainly lower results

EDIT
a good (sensitive) system will begin to show degradation after 20 mounts or so on a 10x10mm soft copper die

11-23-2005, 09:39 AM	#265
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	don't really know pH from an individual perspective all I need is a source, I can figure out what the #s mean from a community perspective a common platform is needed TTVs, good or bad, are out due to nonavailability a heat die is needed, how much similitude is to be sought ? AND HOW WILL THE FACE BE MAINTAINED ? this topic cannot progress (with me) w/o addressing this issue I had offered to lap dies while with Swiftech, this is now out - what next ? I can hand lap because I have a Flatscope (optical flat reflex viewer), do it 'till its right what does everyone else do ? let us NOT hear foolishness about 'good enough', this is the heart of the whole system not flat = variable and certainly lower results EDIT a good (sensitive) system will begin to show degradation after 20 mounts or so on a 10x10mm soft copper die Last edited by BillA; 11-23-2005 at 09:44 AM.