Pro/Forums - View Single Post

nikhsub1 · 11-23-2005, 11:11 AM

Bill I thought the heat die has the simulated IHS built into it? No need for anything else. As for protecting the surface of the die, this is prob a bad idea, but I'll chuck it out there anyway. 3M makes aluminum tape, not sure of the gauge but it is pretty substatial yet bendable/plyable. Obviously this introduces an added layer but a simple test could be done for correction factors. I think the tape would do wonders in at least protecting the surface of the die, but perhaps more trouble than it's worth?

11-23-2005, 11:11 AM	#276
nikhsub1 c00ling p00n Join Date: Jun 2002 Location: L.A. Posts: 758	Bill I thought the heat die has the simulated IHS built into it? No need for anything else. As for protecting the surface of the die, this is prob a bad idea, but I'll chuck it out there anyway. 3M makes aluminum tape, not sure of the gauge but it is pretty substatial yet bendable/plyable. Obviously this introduces an added layer but a simple test could be done for correction factors. I think the tape would do wonders in at least protecting the surface of the die, but perhaps more trouble than it's worth? __________________ :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX PC Power & Cooling Turbo 510 Deluxe Mountain Mods U2-UFO Cube Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res "Artificial intelligence is no match for natural stupidity." 1,223,460+ Ghz Folding@Home aNonForums :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: