Pro/Forums - View Single Post

BladeRunner · 01-24-2002, 07:37 PM

I guess I just love the way copper looks when shiny, especially offset with the shiny brass colour

Unless you really require all the PCI slots I agree leave it empty, but If you are using a true PCI card (that follows the laid down PCI specs) and using a NT kernal OS then in theory Slot sharing / IRQ sharing issues should not exist.

mrcandy224
Sorry I just don't have the equipment or time to make the blocks for others ATM, but I will be looking into it. Unless I could make them with my home built look & quality, I wouldn't bother though.

grep
I don't use PTFE tape if that's what you mean all barbs are either soldered in or screwed in tight with Araldite Epoxy resin on the threads, This of course makes them pretty permanent but is also 99.9% leak proof

01-24-2002, 07:37 PM	#18
BladeRunner Cooling Savant Join Date: Jul 2001 Location: Chesterfield Uk Posts: 459	I guess I just love the way copper looks when shiny, especially offset with the shiny brass colour Unless you really require all the PCI slots I agree leave it empty, but If you are using a true PCI card (that follows the laid down PCI specs) and using a NT kernal OS then in theory Slot sharing / IRQ sharing issues should not exist. mrcandy224 Sorry I just don't have the equipment or time to make the blocks for others ATM, but I will be looking into it. Unless I could make them with my home built look & quality, I wouldn't bother though. grep I don't use PTFE tape if that's what you mean all barbs are either soldered in or screwed in tight with Araldite Epoxy resin on the threads, This of course makes them pretty permanent but is also 99.9% leak proof __________________ Zero Fan Zone Last edited by BladeRunner; 01-24-2002 at 08:04 PM.