Pro/Forums - View Single Post - product testing today

jaydee · 12-01-2005, 08:11 PM

The Swissflows I got have BSP threads. They sent me some BSP to NPT adapters. They used to sell a barbed version but I don't know if they still do. I like my Swissflow other than it is restrictive and they recommend a 20 micron filter. I would be very interested in the results.

I pretty much have all this stuff mentioned in pH post and already used it in previous testing. Another bonus of the CF633 is it will read and log the Swissflow flow meter output aswell.

Only thing I disliked about the CF633 is the speed of the temp changes. That is why I ended up not using it for temps. I use my ColeParmer Unit with the YSI probe to help mount blocks. It scans so fast you can see the temps changing when adjusting the mounting pressure. Helps point out to much or to little pressure on one side.

The biggest problem I have with CPU testing is getting the CPU temp. Not to many can just get the IHS milled.

12-01-2005, 08:11 PM	#32
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Re: product testing today – who is being served ? The Swissflows I got have BSP threads. They sent me some BSP to NPT adapters. They used to sell a barbed version but I don't know if they still do. I like my Swissflow other than it is restrictive and they recommend a 20 micron filter. I would be very interested in the results. I pretty much have all this stuff mentioned in pH post and already used it in previous testing. Another bonus of the CF633 is it will read and log the Swissflow flow meter output aswell. Only thing I disliked about the CF633 is the speed of the temp changes. That is why I ended up not using it for temps. I use my ColeParmer Unit with the YSI probe to help mount blocks. It scans so fast you can see the temps changing when adjusting the mounting pressure. Helps point out to much or to little pressure on one side. The biggest problem I have with CPU testing is getting the CPU temp. Not to many can just get the IHS milled. Last edited by jaydee; 12-01-2005 at 08:48 PM.